| Customization: | Available |
|---|---|
| Type: | Polypropylene Capacitor |
| Application: | General Purpose, Power, High Voltage |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
DAT, DC-Link Power Capacitor (Dry-Type, Aluminum case), 420UF/1100VDC
Features
1. Used in DC-Link circuits, can replace electrolytic capacitor.
2. Low ESR, high ripple current handling capabilities.
3. Low Ls.
4. Self-healing property.
5. Long lifetime.
6. Aluminum case, filled with resin.
Applicaitons
1. Used in inverters of wind power and solar power.
2. Transportation: EV or HEV.
3. Welders, Elevators, Motor Driver systems.
Specifications
| Reference Standard | GB/T 17702 (IEC 6107) |
|
Climatic Category |
D≤116mm: 40/85/56 |
| D=136mm: 40/80/56 | |
|
Operating Temperature Range |
D≤116mm: -40ºC~85ºC (Θ hs≤85ºC) |
| D=136mm: -40ºC~80ºC (Θ hs≤80ºC) | |
| Storage temperature range | -40ºC~85ºC |
| Voltage Range | 600Vdc~4000Vdc |
| Capacitance Range | 24uF~5600uF |
| Capacitance Tolerance | ±5%(J),±10(K) |
| Test Voltage Between Teminals | 1.5Un (10s, 20ºC±5ºC) |
| Test Voltage Between Terminals And Case | Un <1500Vdc,3000Vac (10s, 50Hz,20ºC ±5ºC) |
| Un ≥1500Vdc,(√² Un+ 1000)Vac (10s,50Hz , 20ºC±5ºC) | |
| tg δ d | 0.0002 |
| IR x Cn | ≥5000S(20ºC,500Vdc,1Min) |
|
Over Voltage |
1.1Un (30% of on-load-dur.) |
| 1.15Un (30 min/day) | |
| 1.2Un (5min/day) | |
| 1.3Un (1min/day) | |
| 1.5 Un (30ms every time, 1000times during the lift of the capacitor) | |
| Max. Altitude | 2000m |
| Max. Torque of terminals | M6:5Nm M8:6Nm |
| Max. Torque of Installation | 10Nm |
| Installation | Any Position |
| Expected lifetime | 100000hrs @ Un,Θ hs=70ºC |
| Failure rate | 50 FIT |
Outline Drawing
){kind=link}